Legal notice Data protection

Tungsten carbide burrs for high-performance applications

High capacity burrs

Tungsten carbide burrs for high-performance applications are distinguished by their material or application-specific design, guaranteeing an optimal stock removal rate and high aggressiveness at the same time as good guidability.

TC burrs for high-performance applications are a convincing offering due to their significant time savings and high profitability compared with conventional burrs.

The highly accurate concentricity enables impact­free working without creating chatter marks. The result: considerably reduced wear on the tool and tool drive. The high-performance burrs are also available with a HICOAT coating.

Advantages:

  • Optimum stock removal rate, high aggressiveness, and good guidance.
  • High economic efficiency compared with conventional burrs.
  • The highly accurate concentricity enables impact­free working without creating chatter marks.
  • Significant time savings.
  • Also available with a high-quality HICOAT coating.

PFERD high-performance burrs are based on an innovative and sophisticated system for working on surfaces. The tungsten carbide burrs from our high-performance line offer quick and efficient solutions for a wide range of materials and application areas.

Download

Loading

Material-specific tungsten carbide burrs

The material-specific tungsten carbide burrs by PFERD enable maximum stock removal on a wide range of materials. PFERD has developed a different cut for the various different materials.

The user-friendly product designations make it easier to find the right cut for the material that the user wants to work on.

Material-specific tungsten carbide burrs are available in the following cuts:

Advantages:

  • Maximum stock removal thanks to specially designed cut.
  • User-friendly product designations.
1 / 8
1 / 8
Burrs with CAST cut allow an extremely high stock removal rate on cast iron.
2 / 8
2 / 8
Burrs with TITANIUM cut are specialists for work on hard titanium materials.
3 / 8
3 / 8
The ALU cut was further developed especially for stock removal on aluminium alloys.
4 / 8
4 / 8
The INOX cut prevents heat discolouration in the material due to the reduced heat generation.
5 / 8
5 / 8
PFERD FVKS burrs with a centre drill allow combined drilling and milling work on plastics and other materials.
6 / 8
6 / 8
PLAST cut burrs with an end cut are particularly suitable for machine and robot applications.
7 / 8
7 / 8
The NON-FERROUS cut is characterized by its extremely high stock removal rate on non-ferrous metals and fibre-reinforced plastics.
8 / 8
8 / 8
The extremely high stock removal rate makes burrs with the STEEL cut impressive, with significant time savings and a high economic value.
❮ ❯

Application-specific tungsten carbide burrs

The application-specific tungsten carbide burrs by PFERD enable maximum stock removal for a wide variety of applications.

Users in diverse sectors rely on PFERD’s high-performance burrs for milling out, levelling, deburring or working on weld seams.

No matter whether for tough applications, finishing, or defined work on edges: PFERD has the perfect solution for your applications.

Application-specific tungsten carbide burrs from our high-performance line are available in the following cuts, among others:

Advantages:

  • Maximum stock removal thanks to specially designed cut.
  • The perfect cut for any application.
1 / 7
1 / 7
Burrs with TOUGH cut are also ideal for milling of narrow contours without creating tooth breakages.
2 / 7
2 / 7
The EDGE cut creates exact edge shapes in a single step.
3 / 7
3 / 7
The conical counterbore burr with EDGE cut produces precisely defined chamfers angles of 30° and 45°.
4 / 7
4 / 7
TC burrs with MICRO cut – The stock removal experts for finishing work.
5 / 7
5 / 7
The MICRO cut is used, for example, for corrections in tool and mould construction.
6 / 7
6 / 7
The TOUGH cut has been specially designed for tough operating conditions.
7 / 7
7 / 7
Concave radius burrs for creating exact radii (3 mm outer radii).
❮ ❯

Address:
August Rüggeberg GmbH & Co. KG
Hauptstraße 13
51709 Marienheide
+49 2264 9-0
+49 2264 9-400
Contact us
Get individual advice:
On-site consultation
Customer service
Scroll to top

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.