HSS rotary cutters, cut ALU, pointed tree shape K

HSS rotary cutter ALU pointed tree shape K dia. 16x30 mm shank dia. 6 mm aluminium/non-ferrous

Item number:
22441816
EAN:
4007220059517

Login / Register
Technical information
HSS rotary cutter ALU pointed tree shape K dia. 16x30 mm shank dia. 6 mm aluminium/non-ferrous

Cut
ALU
Dia. external
16 mm
Dia. shank
6 mm
Length, cut
30 mm
Length, total
2,756
Length, total
70 mm
RPM from, soft non-ferrous metals
4000 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content under 40 %
4000 RPM
RPM to, soft non-ferrous metals
6000 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content under 40 %
6000 RPM
Packaging unit
1 piece
Description

The ALU cut is particularly well-suited for machining soft non-ferrous metals, brass, copper, aluminium alloys, plastics, fibre-reinforced plastics and rubber. HSS rotary cutters with the ALU cut can be used in a rotational speed range of 4,000 to 6,000 RPM depending on the rotary cutter diameter.

Pointed tree-shaped burr, flattened tip.

Advantages
  • Highly aggressive.
  • Can be used at low rotational speeds.
  • Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
  • The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
  • Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
  • When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
  • In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.
  • If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
Materials that can be worked
Aluminium
Brass
Copper
Fibre-reinforced thermosetting plastics (GRP, CRP)
Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %
Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %
Plastics
Soft aluminium alloys
Thermoplastics
Zinc
Applications
Cutting out holes
Deburring
Leveling
Milling
Milling out
Work on weld seams
Drive types
Drive spindle
Flexible shaft drive
Robot
Stationary machines
Straight grinder
Tool machine
Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.