HSS rotary cutter set, cut 3

HSS rotary cutter set 86 3-piece cut 3 shank dia. 6 mm universal medium fine

Item number: 22900811
EAN: 4007220229941
Login / Register Retailers-Search
Choose options
PFERD type
Technical information

HSS rotary cutter set 86 3-piece cut 3 shank dia. 6 mm universal medium fine

Dia. shank
6 mm
PFERD type
86 Z3
Packaging unit
1 Piece

Cut 3 has chip breakers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.

Set 86 Z3 contains three HSS rotary cutters for fine and coarse stock removal in the most common shapes and dimensions. The sturdy plastic box protects the tools from dirt and damage.

  • Highly aggressive.
  • Can be used at low rotational speeds.
  • Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
  • The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
  • Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
  • When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
  • In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.
Materials that can be worked
Annealed cast iron
Black annealed cast iron (GTS, GJMB)
Case-hardened steels
Cast iron
Cast steel
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Steel, cast steel
Steels up to 1,200 N/mm² (< 38 HRC)
Steels up to 700 N/mm² (< 220 HB)
Tool steels
White annealed cast iron (GTW, GJMW)
Cutting out holes
Milling out
Work on weld seams
Drive types
Flexible shaft drive
Tool machine
Stationary machines
Straight grinder
chevron-leftAlertBrowse fileFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerSort NoneSort ASCSort DESC