Extensions for drive spindles SPVH13 L500-6 S8

Extension for drive spindles SPVH13 length 500 mm 6 S8 Max.RPM25,000 incl. 6 mm collet

Item number:: 87101280
EAN:: 4007220730478

Technical data

Retailers-Search

Technical information

Extension for drive spindles SPVH13 length 500 mm 6 S8 Max.RPM25,000 incl. 6 mm collet

Collet group: 10
Dia. shank holder [mm]: 8
Dia. spindle, max.: 0.51
Dia. spindle, max.: 13 mm
Dia. tool mounting: 6 mm
Incl. dia collet [mm]: 6
Length, mounting pin: 28 mm
Length, total: 23.86
Length, total: 606 mm
Max. RPM: 25000 RPM
Net weight: 0.502 kg
Packaging unit: 1 piece

Description

With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.

Extension for drive spindles for manual application with a diameter of 13 mm, a length of 500 mm, a tool mounting of 6 mm and a shank holder of 8 mm.

Advantages

Cost-effective alternative to customized burrs and mounted points with long shanks.

Ordering notes

Special lengths are available on request.

Safety notes

The maximum permitted rotational speed is 25,000 RPM.
Caution! When using spindle extensions, please observe the valid safety regulations and accident prevention regulations. Please do not clamp tools which are too large on the extension since they are driven by a core. The extension and machine must be guided in a line. Levering and tilting result in damage to the extension.
When working with long shank lengths, it is essential that the tool is inserted into the workpiece (e.g. bores, pipes, ducts or keyways) before the drive system is switched on. The extension is only intended for manual use in connection with suitable air grinders, electric grinders or flexible shaft handpieces for tools with standard shanks. The extension and a tool permitted for use at the appropriate rotational speed are clamped into an impact-free collet on the device. Do not clamp on the transition radius. Clamping of a second extension or of tools with excessively long shanks is not permitted.

Contents

2 keys DM SW 6/7 mm and 1 collet 6 mm.

Downloads

Extensions for drive spindles SPVH13 L500-6 S8

Extension for drive spindles SPVH13 length 500 mm 6 S8 Max.RPM25,000 incl. 6 mm collet

PFERD Newsletter subscription