EDGE FINISH UWER 18/110 EF-30 TK system for work on edges

electric edge mill EDGE FINISH UWER 18/110 EF-30 TK 230 volts 11,000-2,750 RPM/1,750 watts

Item number:: 83500990
EAN:: 4007220004364

Technical data

Retailers-Search

Technical information

electric edge mill EDGE FINISH UWER 18/110 EF-30 TK 230 volts 11,000-2,750 RPM/1,750 watts

Dia. thread: M14
Height: 150 mm
Length: 500 mm
Net weight: 7.36 kg
Power consumption: 1750 watts
Power output: 1150 watts
Rotational speed range, from: 2750 RPM
Rotational speed range, to: 11000 RPM
Version: In transport case
Voltage, from: 230 volts
WEEE reg. no.: 55553582
Width: 70 mm
Packaging unit: 1 piece

Description

Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.

The electric grinder with stepless rotational speed regulation is particularly suitable for quick and clean work on edges. The on/off switch is lockable. The drive and its corresponding accessories can be stored in the carry case.

Advantages

The digital electronics enable a constant rotational speed to be maintained.
Overload protection.
Smooth start-up to protect people, tools and the drive.
Restart protection in case of power failure (USP).
Maximum comfort and optimal guidance thanks to ergonomically optimized design and very good haptic properties.
Enables work with low levels of fatigue thanks to SENSOHANDLE anti-vibration handle.

Recommendations for use

Move the EDGE FINISH system over the workpiece counterrotationally in order to prevent damage to the tool and chatter marks on the workpiece.
Process very uneven burn burrs beforehand using reinforced grinding wheels or POLIFAN flap discs to prevent damage to the cutting inserts and improve guidance.
Proper servicing and correct storage will increase the service life of your drive and tool.

Safety notes

Do not use damaged cutting inserts! They may break!

Contents

4 m power cable, 3 keys, anti-vibration handle, cutting insert holder with guide bearing, screw set for cutting inserts

PFERDVALUE

PFERDEFFICIENCY

recommends the EDGE FINISH system for work on edges for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

PFERDERGONOMICS

recommends the EDGE FINISH system for work on edges as an innovative tool solution for comfortable working with reduced vibration, good haptic properties and optimized tool guidance.

Downloads

EDGE FINISH UWER 18/110 EF-30 TK system for work on edges

electric edge mill EDGE FINISH UWER 18/110 EF-30 TK 230 volts 11,000-2,750 RPM/1,750 watts

PFERDEFFICIENCY

PFERDERGONOMICS

PFERD Newsletter subscription