Abrasive spiral band set

Abrasive spiral band set 13-piece aluminium oxide dia. 10x20 mm A60,80,150,240 with holder shank dia. 6 mm

Item number:: 42298001
EAN:: 4007220231463

Abrasive spiral band set 13-piece aluminium oxide dia. 10x20 mm A60,80,150,240 with holder shank dia. 6 mm 2

Technical data Change variant

Retailers-Search

This set contains

Rubber drum holder GK cylindrical dia. 10x20 mm shank dia. 6 mm

Item number: 42102000

EAN: 4007220146781
aluminium oxide abrasive spiral band KSB cylindrical dia. 10x20mm A80 for general use

Item number: 42232108

EAN: 4007220148952
aluminium oxide abrasive spiral band KSB cylindrical dia. 10x20mm A150 for general use

Item number: 42232115

EAN: 4007220148969
aluminium oxide abrasive spiral band KSB cylindrical dia. 10x20mm A240 for general use

Item number: 42232124

EAN: 4007220148976

Technical information

Abrasive spiral band set 13-piece aluminium oxide dia. 10x20 mm A60,80,150,240 with holder shank dia. 6 mm

Dia. external: 10 mm
PFERD type: SET 1020 A
Width: 20 mm
Packaging unit: 1 piece

Description

PFERD offers a wide selection of coated abrasive tools for working on different workpiece geometries and materials. They consist of a base, a base bond and a coating bond for the abrasive grain to adhere to. Depending on the grit size, coated abrasive tools can achieve a high stock removal rate or a very fine surface finish.

The available backing materials differ in properties such as tear strength, flexibility and wear. With the right base, the grinding tool is adapted to the requirements of the intended application: paper is used in the woodworking industry and in trade, e.g. among carpenters, painters and decorators, cloth is predominantly used for metalwork, and vulcanized fibre is highly wear-resistant and is used in various thicknesses predominantly for making fibre discs.

The set contains cylindrical abrasive spiral bands suitable for a selection of different applications, designed for universal use in coarse to fine grinding, as well as an appropriate rubber drum holder.

Advantages

The abrasive spiral band is firmly held in place on the rubber drum holder as the holder expands during use.
Excellent tool life due to special manufacturing process – even under the most demanding operating conditions.
Maximum economic efficiency thanks to particularly high stock removal rate and aggressive abrasive quality.
For getting to know and testing the comprehensive range.
Coordinated selection of the most common grit sizes.

Recommendations for use

To easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the tool drive.
To ensure the abrasive spiral band is securely attached, adhere to the minimum speed for the rubber drum holder.
For the best results, use at a recommended cutting speed of 20-30 m/s.
Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

Safety notes

The maximum permitted peripheral speed is 30 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Do not allow abrasive spiral bands to protrude beyond the rubber drum holder.

Materials that can be worked: Aluminium; Annealed cast iron; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics

Applications: Deburring; Leveling; Roughening; Sharpening; Step-by-step fine grinding; Surface work; Working on edges; Work on weld seams

Drive types: Flexible shaft drive; Straight grinder

Downloads

Abrasive spiral band set

Abrasive spiral band set 13-piece aluminium oxide dia. 10x20 mm A60,80,150,240 with holder shank dia. 6 mm

This set contains

PFERD Newsletter subscription