Wheel brushes crimped shank-mounted

Wheel brush crimped RBU dia. 70x8 mm shank dia. 6 mm ceramic filament dia. 0.55 mm grit 120

Item number:
43104078
EAN:
4007220936559

Login / Register
Choose options
Dia. external
Dia. filament material
Filament material
Packaging
Width
Packaging unit
Technical information
Wheel brush crimped RBU dia. 70x8 mm shank dia. 6 mm ceramic filament dia. 0.55 mm grit 120

Dia. external
70 mm
Dia. filament material
0.55 mm
Dia. shank
6 mm
Filament material
Ceramic oxide grain (CO)
Grit size
120
Length, filament
19 mm
Length, total
2
Length, total
50 mm
Max. RPM
15000 RPM
Mounting system
Shank
Packaging
Industrial packaging
RPM, optimum, from
6000 RPM
RPM, optimum, to
9800 RPM
Width
8 mm
Packaging unit
10 pieces
Description

Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint.

Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness. For high stock removal values and aggressive brushing behaviour.

Plastic filament withstands temperatures up to 220 °C.

Advantages
  • Highly flexible, enabling optimal adjustment to the workpiece contour.
  • Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Recommendations for use
  • Please observe the recommended rotational speeds.
  • For the best results, use a tool drive with a minimum output of 300 watts.
  • Use coolant for applications where large amounts of heat are produced.
Safety notes
  • When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.
Materials that can be worked
Aluminium
Bronze
Cast iron
Cast steel
Cobalt-based alloys
Hard non-ferrous metal
High-temperature-resistant materials
Nickel-based alloys (e.g. Inconell and Hastelloy)
Nickel or titanium-based superalloys
Other non-ferrous metals
Soft titanium alloys (tensile strength 500 N/mm²)
Steel, cast steel
Steel materials with a hardness > 54 HRC
Steels up to 1,200 N/mm² (< 38 HRC)
Titanium
Titanium alloys
Applications
Cleaning
Deburring
Structuring (matt finishing, brush matting and satin finishing)
Drive types
Flexible shaft drive
Power drill
Straight grinder
Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.