Wheel brush crimped RBU dia. 50x15 mm shank dia. 6 mm brass wire dia. 0.20

Technical information

Dia. external: 50 mm
Dia. filament material: 0.2 mm
Dia. shank: 6 mm
Filament material: Brass wire (MES)
Length, filament: 13 mm
Length, total: 2
Length, total: 50 mm
Max. RPM: 15000 RPM
Mounting system: Shank
Packaging: Industrial packaging
RPM, optimum, from: 6000 RPM
RPM, optimum, to: 9800 RPM
Width: 15 mm
Packaging unit: 10 pieces

Description

Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint.

Brushes with brass wire filament material are suitable for particular applications such as surface finishing on workpieces made from copper and brass. In comparison to steel wire, brass wire is softer and more flexible. For all brushes with brass wire, PFERD uses wire quality CuZn37.

Brass wire withstands temperatures up to 180 °C.

Advantages

Highly flexible, enabling optimal adjustment to the workpiece contour.
Non-sparking.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Brass; Copper; Other non-ferrous metals; Zinc

Applications: Cleaning; Deburring; Removing oxide layers

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

Wheel brushes crimped shank-mounted

Wheel brush crimped RBU dia. 50x15 mm shank dia. 6 mm brass wire dia. 0.20

PFERD Newsletter subscription