Deburring brush crimped RBU dia. 250x60x50.8 mm hole steel wire dia. 0.20 stationary

Technical information

Dia. external: 250 mm
Dia. filament material: 0.2 mm
Dia. hole: 50.8 mm
Dia. hole, max.: 100 mm
Filament material: Steel wire (ST)
Length, filament: 50 mm
Max. RPM: 3600 RPM
Mounting system: Centre hole
RPM, optimum, from: 1800 RPM
RPM, optimum, to: 2700 RPM
Width: 60 mm
Packaging unit: 1 piece

Description

Particularly suitable for deburring pipes, cut edges and small parts on stationary machines.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire withstands temperatures up to 300 Â°C.

Advantages

Individual check for imbalance guarantees smooth running.
Maximum tool life thanks to high filament density.
Long tool life through use of PFERD special wire.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.

Ordering notes

Please order adapter pairs APM 50.8 separately.

Materials that can be worked: Cast iron; Cast steel; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing oxide layers; Roughening

Drive types: Stationary machines

Downloads

Wheel brushes crimped deburring brushes, with hole

Deburring brush crimped RBU dia. 250x60x50.8 mm hole steel wire dia. 0.20 stationary

PFERD Newsletter subscription