Deburring brush crimped RBU dia. 250x60x50.8 mm hole stainless steel wire dia. 0.20 stationary

Technical information

Deburring brush crimped RBU dia. 250x60x50.8 mm hole stainless steel wire dia. 0.20 stationary

Dia. external: 250 mm
Dia. filament material: 0.2 mm
Dia. hole: 50.8 mm
Dia. hole, max.: 100 mm
Filament material: Stainless steel wire (INOX)
Length, filament: 50 mm
Max. RPM: 3600 RPM
Mounting system: Centre hole
RPM, optimum, from: 1400 RPM
RPM, optimum, to: 2300 RPM
Width: 60 mm
Packaging unit: 1 piece

Description

Particularly suitable for deburring pipes, cut edges and small parts on stationary machines.

In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life. All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic in the case of cold working; i.e. it can be attracted using magnets. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) withstands temperatures up to 450 °C.

Advantages

Individual check for imbalance guarantees smooth running.
Maximum tool life thanks to high filament density.
Very good corrosion resistance.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.

Ordering notes

Please order adapter pairs APM 50.8 separately.

Materials that can be worked: Aluminium; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing heat discolouration; Removing oxide layers; Roughening

Drive types: Stationary machines

Downloads

Wheel brushes crimped deburring brushes, with hole

Deburring brush crimped RBU dia. 250x60x50.8 mm hole stainless steel wire dia. 0.20 stationary

PFERD Newsletter subscription