The correct rotational speed for any material – in our free white paper.
Legal notice Data protection

Tungsten carbide burr set for high performance, cut MICRO

Tungsten carbide small high-performance burr set 1502 MICRO 10-piece dia. 6/3/2 mm shank dia. 3 mm finishing

SET 1502 MICRO 10TLG
Item number:
21901502
EAN:
4007220896181
Tungsten carbide small high-performance burr set 1502 MICRO 10-piece dia. 6/3/2 mm shank dia. 3 mm finishing 1
Tungsten carbide small high-performance burr set 1502 MICRO 10-piece dia. 6/3/2 mm shank dia. 3 mm finishing 2
Tungsten carbide small high-performance burr set 1502 MICRO 10-piece dia. 6/3/2 mm shank dia. 3 mm finishing 3
Tungsten carbide small high-performance burr set 1502 MICRO 10-piece dia. 6/3/2 mm shank dia. 3 mm finishing Youtube
Tungsten carbide small high-performance burr set 1502 MICRO 10-piece dia. 6/3/2 mm shank dia. 3 mm finishing 1
Tungsten carbide small high-performance burr set 1502 MICRO 10-piece dia. 6/3/2 mm shank dia. 3 mm finishing 2
Tungsten carbide small high-performance burr set 1502 MICRO 10-piece dia. 6/3/2 mm shank dia. 3 mm finishing 3
Tungsten carbide small high-performance burr set 1502 MICRO 10-piece dia. 6/3/2 mm shank dia. 3 mm finishing Youtube
Technical data Change variant
Login / Register
Retailers-Search
Choose options
PFERD TOOLS type
Reset Filter

This set contains

Technical information
Tungsten carbide small high-performance burr set 1502 MICRO 10-piece dia. 6/3/2 mm shank dia. 3 mm finishing
Cut
MICRO
Dia. shank
3 mm
PFERD TOOLS type
1502 MICRO
Packaging unit
1 piece
Description

Tungsten carbide burrs with the MICRO cut are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a higher stock removal rate than mounted/grinding points and impress with their high surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined.

Set 1502 MICRO contains ten small tungsten carbide burrs for finishing work in the most common shapes and dimensions. The sturdy plastic box protects the tools against dirt and damage.
Advantages
  • High surface quality.
  • Unlike with mounted grinding points, there is no change in geometry due to wear and tear.
  • Use on almost all materials up to 68 HRC.
  • The highly accurate concentricity enables impactfree working without creating chatter marks and the drive is subject to less wear.
Recommendations for use
  • Particularly well suited to finishing, for very fine cleaning work, corrections in tool and mould construction or for sharpening cutting tools.
  • To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
  • Observe the recommended rotational speeds.
Materials that can be worked
Annealed cast iron
Black annealed cast iron (GTS, GJMB)
Bronze
Case-hardened steels
Cast iron
Cast steel
Cobalt-based alloys
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Hard non-ferrous metal
Nickel-based alloys (e.g. Inconell and Hastelloy)
Stainless steel (INOX)
Steel
Steel, cast steel
Steels over 700 N/mm² (> 220 HB)
Steels up to 1,200 N/mm² (< 38 HRC)
Steels up to 700 N/mm² (< 220 HB)
Titanium
Titanium alloys
Tool steels
White annealed cast iron (GTW, GJMW)
Applications
Cutting out holes
Deburring
Leveling
Milling
Milling out
Surface work
Work on weld seams
Drive types
Automated centres
Flexible shaft drive
Straight grinder
Tool machine
PFERD TOOLS VALUE

PFERD TOOLS EFFICIENCY

recommends burrs with the MICRO cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.
product.aggregation.prv-eff

PFERD TOOLS ERGONOMICS

recommends burrs with the MICRO cut as an innovative tool solution for comfort when working, with significantly reduced vibration and less noise.
product.aggregation.prv-ergo
product.aggregation.prv-ergo
product.aggregation.prv-ergo
Downloads
wzh25-catalogue-2-web-int-en.pdf
See more
Address:
August Rüggeberg GmbH & Co. KG
Hauptstraße 13
51709 Marienheide
+49 2264 9-0
+49 2264 9-400
Contact us
Get individual advice:
On-site consultation
Customer service
Scroll to top

PFERD TOOLS Newsletter subscription

Register here free of charge for our PFERD TOOLS newsletter and receive all the latest news on products, services and promotions from the world of PFERD TOOLS on a regular basis.