POLICLEAN discs PCLD

POLICLEAN PLUS PCLD non-woven cleaning fabric dia. 115x13 mm hole dia. 22.3 mm for coarse cleaning work

Item number:: 44692716
EAN:: 4007220069233

POLICLEAN PLUS PCLD non-woven cleaning fabric dia. 115x13 mm hole dia. 22.3 mm for coarse cleaning work 2

POLICLEAN PLUS PCLD non-woven cleaning fabric dia. 115x13 mm hole dia. 22.3 mm for coarse cleaning work 3

POLICLEAN PLUS PCLD non-woven cleaning fabric dia. 115x13 mm hole dia. 22.3 mm for coarse cleaning work 4

Technical data Change variant

Retailers-Search

Choose options

Dia. external

100 mm 115 mm 125 mm

Version

PCLD PCLD PLUS

Packaging unit

1 5

Reset Filter

Technical information

POLICLEAN PLUS PCLD non-woven cleaning fabric dia. 115x13 mm hole dia. 22.3 mm for coarse cleaning work

Abrasive: Aluminium oxide A
Dia. external: 115 mm
Dia. hole: 22.23 mm
Max. RPM: 10000 RPM
RPM, optimum, from: 5000 RPM
RPM, optimum, to: 7000 RPM
Version: PCLD PLUS
Width: 13 mm
Packaging unit: 5 pieces

Description

The non-woven cleaning material is glued onto a glass-fabric base. This makes POLICLEAN discs suitable for use in face-down grinding. For coarse cleaning work, e.g. removing paint, scale, heat discolouration, rust and adhesive residue.

POLICLEAN is a coarsely structured, abrasive, non-woven cleaning fabric that was developed from a special combination of synthetic fibres and abrasive grain.

Advantages

High flexibility and open structure mean optimal adjustment to contours and no clogging of the tool itself.
The PLUS version (blue) has a considerably higher stock removal rate and a very good tool life, and is very aggressive.

Recommendations for use

For the best results, use at a recommended cutting speed of 30-35 m/s.
Preferably for use on slow-running angle grinders.

Safety notes

For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Aluminium; Annealed cast iron; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Cleaning; Roughening; Surface work

Drive types: Drive spindle; Flexible shaft drive; Straight grinder

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 11/58 RS PGAS 11/58 RS

POLICLEAN discs PCLD

POLICLEAN PLUS PCLD non-woven cleaning fabric dia. 115x13 mm hole dia. 22.3 mm for coarse cleaning work

Matching tool drive

PFERD Newsletter subscription