Grinding discs for saw chains

CHAIN SHARP grinding disc CS-G dia. 145x3.2 mm centre hole dia. 22.2 mm A60 for sharpening saw chains

Choose options

Dia. external

145 mm

Dia. hole

22.2 mm

Grit size

Width

3.2 mm 4.7 mm 6 mm

Technical information

CHAIN SHARP grinding disc CS-G dia. 145x3.2 mm centre hole dia. 22.2 mm A60 for sharpening saw chains

Description

The grinding discs for saw chains are exceptionally well-suited for mechanical sharpening of saw chains using chain sharpeners.

The grinding discs are optimized for sharpening saw chains.

Advantages

Recommendations for use

Observe the recommendations for use and safety notes for your sharpener.
The grinding disc can be used to sharpen sharpeners with chain pitch 1/4", 3/8" LP*, .325".
Suitable for low profile saw chains (LP).

Safety notes

The maximum permitted peripheral speed is 35 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Before clamping, the grinding tool must be ring tested to make sure that it does not have any cracks (undamaged grinding tools give a clear tone).

Materials that can be worked: Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel; Steel materials with a hardness > 54 HRC

Downloads