Tungsten carbide burr conical pointed SKM dia. 06x13 mm shank dia. 3 mm Z3P universal medium cross cut

Technical information

Angle: 25 °
Cut: 3 PLUS
Dia. external: 6 mm
Dia. shank: 3 mm
Length, cut: 13 mm
Length, total: 1,693
Length, total: 43 mm
RPM from, grey cast iron, white cast iron: 24000 RPM
RPM from, hardened, heat-treated steels over 1,200 N/mm²: 13000 RPM
RPM from, high-temperature-resistant materials: 13000 RPM
RPM from, rust and acid-resistant steels: 13000 RPM
RPM from, steels up to 1,200 N/mm²: 24000 RPM
RPM to, grey cast iron, white cast iron: 32000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²: 19000 RPM
RPM to, high-temperature-resistant materials: 24000 RPM
RPM to, rust and acid-resistant steels: 19000 RPM
RPM to, steels up to 1,200 N/mm²: 32000 RPM
Packaging unit: 1 piece

Description

Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Conical pointed burr according to DIN 8032 with cut conforming to DIN 8033, flattened tip.

Advantages

Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
Long tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
High surface quality.

Recommendations for use

If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Tungsten carbide burrs for general use, cut 3 PLUS, conical pointed shape SKM

Tungsten carbide burr conical pointed SKM dia. 06x13 mm shank dia. 3 mm Z3P universal medium cross cut

Included in

Matching tool drive

PFERD Newsletter subscription