Zirkon abrasive belt BA 75x2000mm Z60 FORTE for high stock removal with a belt grinder

Technical information

Abrasive: Zirconia alumina Z-FORTE
Acc. to ISO: ISO 2976
Grit size: 60 FORTE
Length: 2000 mm
Width: 75 mm
Packaging unit: 10 pieces

Description

For coarse grinding work with a high stock removal rate and long tool life and very cool grinding. Particularly suitable for work on thin-walled stainless steel (INOX) components and on steels or nickel-based alloys that do not conduct heat well.

Long belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Advantages

High tear strength with optimum flexibility.
Consistent results through very good grain adhesion.
High economic efficiency due to high abrasive performance and long tool life.

Recommendations for use

Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

Safety notes

Follow the safety notes from the VDS (German Abrasives Association) â€œSafety notes for correct use of abrasive beltsâ€.

Materials that can be worked: Annealed cast iron; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC

Applications: Deburring; Leveling; Sharpening; Step-by-step fine grinding; Working on edges; Work on weld seams

Drive types: Belt grinders and belt arms

Downloads

Long belts

Zirkon abrasive belt BA 75x2000mm Z60 FORTE for high stock removal with a belt grinder

Matching accessories & spare parts

PFERD Newsletter subscription