Tungsten carbide high-performance burr cylindrical with radius end WRC dia. 03x13 mm shank dia. 3 mm TITANIUM for titanium

Technical information

Tungsten carbide high-performance burr cylindrical with radius end WRC dia. 03x13 mm shank dia. 3 mm TITANIUM for titanium

Cut: TITANIUM
Dia. external: 3 mm
Dia. shank: 3 mm
Length, cut: 13 mm
Length, total: 43 mm
RPM, hard non-ferrous metals: 27000 - 48000 RPM
Packaging unit: 1 piece

Description

The TITANIUM cut has been especially developed for work on hard titanium materials (tensile strength > 500 N/mm²). It is characterized by an extremely high stock removal rate on this material group, which has very challenging stock removal properties. Tungsten carbide burrs with the TITANIUM cut impress with their smooth milling with considerably reduced vibration and less noise.

Cylindrical burr with radius end according to DIN 8032. Combination of cylindrical and ball-shaped geometries.

Special features

Excellent stock removal rate and tool life due to innovative tooth geometry.
Tangibly more aggressive, large chips and very good chip removal.
Comfortable working with reduced vibration and less noise.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Determine the rotational speed in each case depending on the titanium alloy you need to machine.
Reduce the rotational speed if excessive flying sparks occur. Depending on the titanium alloy you are machining, flying sparks may not be entirely avoidable.
To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.

Safety notes

The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Materials that can be worked: Hard non-ferrous metal; Titanium; Titanium alloys

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Automated centres; Flexible shaft drive; Straight grinder; Tool machine

Downloads

brochure-tc-burrs-titanium-cut-2020-web-en.pdf

Tungsten carbide burrs for high performance, TITANIUM, cylindrical shape with radius end WRC

Tungsten carbide high-performance burr cylindrical with radius end WRC dia. 03x13 mm shank dia. 3 mm TITANIUM for titanium

WRC 0313/3 TITANIUM

Matching accessories & spare parts

Matching tool drive

Get individual advice:

On-site consultation

Customer service

PFERD TOOLS Newsletter subscription