Tungsten carbide burrs for general use, cut 3, inverted cone WKN without end cut

Tungsten carbide burr inverted cone WKN dia. 12x13 mm shank dia. 6 mm Z3 universal medium

WKN 1213/6 Z3

Item number:: 21155136
EAN:: 4007220049235

Tungsten carbide burr inverted cone WKN dia. 12x13 mm shank dia. 6 mm Z3 universal medium 1

Tungsten carbide burr inverted cone WKN dia. 12x13 mm shank dia. 6 mm Z3 universal medium 2

Technical data Change variant

Retailers-Search

Matching accessories & spare parts

Handpieces for RCK system RCK GS 4/100

Technical information

Tungsten carbide burr inverted cone WKN dia. 12x13 mm shank dia. 6 mm Z3 universal medium

Angle: 20 °
Cut: 3
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 13 mm
Length, total: 53 mm
RPM, grey cast iron, white cast iron: 12000 - 16000 RPM
RPM, hard non-ferrous metals: 7000 - 9000 RPM
RPM, hardened, heat-treated steels over 1,200 N/mm²: 7000 - 9000 RPM
RPM, rust and acid-resistant steels: 7000 - 9000 RPM
RPM, soft non-ferrous metals: 12000 - 16000 RPM
RPM, steels up to 1,200 N/mm²: 12000
Packaging unit: 1 piece

Description

Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Inverted cone-shaped rotary cutter, tapered towards the shank according to DIN 8032 with cut conforming to DIN 8033. Suitable for work on hard-to-reach, reverse-side edges.

Due to their special shapes, tungsten carbide burrs for flexible work on edges achieve almost precise chamfers or radii and can also be used flexibly in hard-to-reach areas. They are mainly used in steel and aluminium construction and have been specifically designed for chamfering, deburring and rounding of edges.

Special features

Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
Long tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Soft aluminium alloys; Soft non-ferrous metal; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Zinc

Applications: Chamfering; Countersinking; Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Working on edges; Working on edges (chamfering, rounding); Work on weld seams