COMBIDISC aluminium oxide Mini-POLIFAN CDR dia. 75 mm A80 for general use

Technical information

COMBIDISC aluminium oxide Mini-POLIFAN CDR dia. 75 mm A80 for general use

Abrasive: Aluminium oxide A
Clamping system: CDR system
Dia. external: 75 mm
Grit size: 80
RPM, optimum: 8000 - 10000 RPM
Packaging unit: 10 pieces

Description

For general coarse grinding work with high stock removal rates. Ideal for dressing weld seams in hard-to-reach places.

Longer tool life and higher stock removal rate when compared to abrasive discs.

The CDR clamping system has a threaded connection with male thread (plastic) on the tool side. Also suitable for the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.

Special features

High economic efficiency as tool can be changed quickly.
Very comfortable due to ease of use and low-vibration working.
No disruptions in use due to adhesion, slipping or coming loose.

Recommendations for use

Use COMBIDISC Mini-POLIFAN discs with an arbor on flexible shaft drives with an angle handpiece, or small compressed-air or electric angle grinders.
Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

Ordering notes

Please order arbor separately.

Safety notes

The maximum permitted peripheral speed is 50 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Annealed cast iron; Brass; Bronze; Cast steel; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys