COMBIDISC Zirkon Mini-POLIFAN CD dia. 75 mm Z80 for hardened steel

Technical information

COMBIDISC Zirkon Mini-POLIFAN CD dia. 75 mm Z80 for hardened steel

Abrasive: Zirconia alumina Z
Clamping system: CD system
Dia. external: 75 mm
Grit size: 80
RPM, optimum: 8000 - 10000 RPM
Packaging unit: 10 pieces

Description

For coarse grinding work with a high stock removal rate and a long tool life.

The CD clamping system has a threaded connection with female thread (metal/plastic) on the tool side. Also suitable for the following commonly used systems: PSG, Power Lock Type II "turn on", SocAtt, Turn-On.

Special features

High economic efficiency as tool can be changed quickly.
Very comfortable due to ease of use and low-vibration working.
No disruptions in use due to adhesion, slipping or coming loose.

Recommendations for use

Use COMBIDISC Mini-POLIFAN discs with an arbor on flexible shaft drives with an angle handpiece, or small compressed-air or electric angle grinders.
Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
Use in the case of a higher contact pressure.

Ordering notes

Please order arbor separately.

Safety notes

The maximum permitted peripheral speed is 50 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Annealed cast iron; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Titanium